How to Clean a Reflective Vest?

In order to maintain the reflective effect of the reflective vest, special care should be taken when washing. Here are some suggestions for washing and maintaining the reflective vest:

When washing, it is recommended to use a gentle method, use clean water and a soft cloth to wipe, especially on the reflective strip part, to avoid excessive force that may cause it to fall off or be damaged.

It is recommended to use hand washing to clean the reflective vest. It is not recommended to put it in the washing machine with other clothes to reduce the damage that may be caused by friction and squeezing.

When washing, please use warm water and control the temperature below 40°C to avoid high temperature from adversely affecting the reflective material.

If ironing is required, make sure that the temperature of the bottom of the iron does not exceed 110°C, and avoid using steam ironing to prevent damage to the reflective vest.

Minimize mechanical operations, such as spin drying, etc. It is not recommended to use a drum to dry the reflective vest to protect its reflective material.

It is forbidden to use chlorine-containing bleach and strong alkaline detergents, washing solvents or emulsions, as these chemicals may destroy the special properties of the reflective material.

When storing, avoid direct sunlight to reduce the aging of the reflective tape. At the same time, try to minimize excessive folding of the reflective tape to maintain its reflective effect and extend its service life.

By following these cleaning and maintenance recommendations, you can ensure that the reflective vest maintains good reflective effect during use and improves safety in dark or low-light environments.